Also allows for attaching an SRS tending device for optimum positioning. The side plates boast increased fairleads and tuned angles for more efficient prusik minding.7,000 lb breaking strength, max capacity 1/2”, 2.75” tall x 2.75” wide, weighs 3.2 oz.This spacer is designed to be used with the DMM Pinto Rig Pulley to keep the side plates from pinching together when using textile products.Ideal for arborist rigging where two independent tie-ins are required.
Rope capacity 7-14mm (35/64").
NOTCH Micro Pulley Combo. This opening will accept a wide variety of carabiners, allows multiple connections, and permits the carabiner to self-center to the load. As expected, the new Roller Bearing ISC Wales Phlotich Hitch-minding Pulley really is smoother in operation.”“One additional consideration that is not advertised as much as it should be, is that the hitch climber requires a spliced eye climbing line, a large connection knot at the carabiner could interfere with the operation of the friction hitch (a rather dangerous situation). 1 1/4” aluminum sheave.Incredibly high strength in this compact and sleek micro pulley. With three carabiner holes, the Hitch Climber can be the center of many great SRT and DdRT climbing systems. Should only be used with spliced-eye climbing lines.This little purple guy is one of our best-selling Micro pulleys. Not load-rated.The Rigger Pulleys feature a new axle construction with stronger axle/side plate interface for increased longevity. Made in Wales.1/2" rope capacity, 7,000 lb MBS, 2.75" x 3.75", weighs 4 oz.3,375 lb breaking strength, 1/2” capacity, 2 5/8” long by 1 3/4” wide, weighs 2.65 oz.5,175 lb breaking strength, 1/2” capacity, 3” tall x 1.75 ” wide, weighs 3.2oz.A double-sheaved version of the micro snatch pulley, this rescue model features the same Anodized side plates, 1 1/4” aluminum sheave, lower becket.CMI's Tri Tie pulley is built to work in arborist applications where two or more tie-ins are desired. For friction hitch work positioning systems, whether with moving or stationary rope, it is the epitome of refinement.44 kN MBS, 8 kN WLL. This redesign of the classic Hitch Climber advances your friction hitch earlier and fairleads your rope better for greater efficiency. We're sure you'll find many other uses for this great new pulley.The Hydra can be loaded at any of the three rubber-lined carabiner holes on the swivel top, and has a maximum rope diameter of 1/2” (13mm), breaking strength of 28kN (6294 lb), and a WLL of (5kN 1124 lb).7,000 lb breaking strength, 1/2” capacity, 2.75” tall x 1.85” wide, weighs 2.4oz.“The way your friction hitch and climbing line connect to the pulley allows the tension in your climbing line to straight line the pulley and keep it from flopping all over the place. Fairlead flares and rounded cheek plate edges help maintain high working efficiency, and attachment holes reduce the probability of carabiner rotation.7,000 lb breaking strength, max capacity 1/2”, 3.5” tall x 1.75” wide, weighs 4 oz.These dog-leash style swivel snaps are great for your split tail climbing set up. The build quality is top of the line.
Using pulleys throughout your climbing system can help reduce overall friction and improve the efficiency of your climbing.“My first pulley, initially used for 'hitch tending' a Blake's hitch; always on my belt for use when needed. It can be used 500,000 different ways (or I'm convinced it can be as I seem to imagine up a new one every week). The Hitch Climber is the most popular pulley for this purpose, but WesSpur also has the popular CMI, SMC, and Petzl pulleys used by many. I particularly like the self-aligning aspect of the "kidney aperture". They have a number of other uses as well, and are great for making tool straps. This kit packages the Eccentric with 9mm Bail Out XL prusik (30) and two DMM UltraO carabiners which gives you a flexible setup that will work well on a wide range of ropes, and saves you a few bucks!“(Hitch Climber Pulley Set) I love it, used for about 6 months as a positioning system and for rappel, it never lets me down. The Notch Micro Pulley is ideal for tending a friction hitch or provid… $24.95. This kit packages the Phlotich with 9mm Bail Out XL prusik (30") and two ISC Offset Oval carabiners which gives you a flexible setup that will work well on a wide range of ropes, and saves you a few bucks!Match up the prusik diameter with your climbing line: 5/16" prusiks will work with 7/16" ropes, 3/8" for 1/2", and 9mm prusiks will work with either.This redesign of the classic Hitch Climber advances your friction hitch earlier and fairleads your rope better for greater efficiency. The Tri Tie is built with swinging, aluminum sideplates, a 1.25" aluminum sheave, bronze bushing, and aluminum axle.Versatile, ultra-compact pulley from Petzl.Breaking strength 5,400 lb, 1/2” capacity, 3.75” tall by 2.75” wide, weighs 3.4oz.High strength and sleek design make the DMM Pinto Rig Pulley a great addition to your gear bag. Rounded anchor holes work great with custom spliced terminations or carabiners.